ZBDynamiX ZHA-R83-101-DNN-CO-I Integrated Harmonic Joint Actuator | 120 Nm Peak Torque, 101:1 Ratio, OD83 mm
ZBDynamiX ZHA-R83-101-DNN-CO-I: 83mm actuator with 101:1 reduction ratio, 120 Nm peak torque, and 30 arcmin backlash. Features CAN protocol, dual 19-bit encoder, and ≤60 dB noise. Ideal for robotic shoulder, elbow, knee, and waist joints.
ZBDynamiX ZRM-75 7-Axis Force-Controlled Robot Arm | 5kg Payload, 700mm Max. Reach
Key Attributes Rated Payload 5kg Robot Weight 10kg Degrees of Freedom 7 Maximum Reach 700mm Repeatability ±0.1mm Absolute Positioning Accuracy ±1mm Maximum TCP Speed ≥2m/s Joint Through-Hole Diameter 9mm IP Rating IP54 Joint 1 ±178° Joint 2 ±120° Joint 3 ±178° Joint 4 -60°~+145° Joint 5 ±178° Joint ...
ZBDynamiX ZAG-2F120S-N Two-Finger Parallel Robotic Gripper | 120 mm Stroke, 50 N Gripping Force, ±0.03 mm Repeatability
Key Attributes Drive Type Motor Drive Operating Voltage 24 V Maximum Stroke 120 mm Maximum Gripping Speed 200 mm/s Maximum Gripping Force 50 N Maximum Payload — Maximum Current 1 A Weight 1.1 kg Repeatability ±0.03 mm Programmable Parameters — Feedback Parameters Position, Speed, Force Maximum Noise ...
ZBDynamiX ZDH-16D-222-N 20-DoF Dexterous Robotic Hand | 16 Active DOF, 52 N Grip Strength, CAN FD Communication
Key Attributes Mass(Wrist Included) 790g Length of Hand 222 mm Width of Hand 100 mm Total DoF 20 Active DoF 16 Voltage Range 12~18 V Static Current 0.5A @12V Average Current During Idle Motion 3A @12V Maximum Current for Maximum Grip 7.5A @12V Communication Protocal CAN FD Full-Stroke Travel Time 0...
ZBDynamiX ZDH-6D-183-T 11-DoF Dexterous Robotic Hand with Tactile Sensing | 30 kg Max Payload, ±0.05 mm Repeatability
ZBDynamiX artificial intelligence robot hand Max Payload 30KG with EtherCAT for robotic arms Material Handling or service robots
ZBDynamiX ZMA-PGB-32.49-12-47.1 Micro Planetary Gear Motor | 276 mNm Stall Torque, 32.49:1 Reduction Ratio, OD12 mm
Key Attributes Dimension ⌀12*47.1 mm Mass 28 g Operating Voltage 12 V Nominal Power 5.4 W Nominal Torque 92 mNm No-load Speed 369 rpm No-load Current 45 mA Loaded Speed 246 rpm Loaded Current 0.45 A Stall Torque ≥276 mNm Stall Current 1.4 A Gearbox Reduction Ratio 32.49 Gear Stages 2 Max. Gearbox ...
ZBDynamiX ZPA-Lite-43-15-36-D Integrated Planetary Joint Actuator | 33 Nm Peak Torque, 80 rpm, OD56 mm
Key Attributes Dimension ⌀56×71.5 mm Reduction Ratio 36 Mass 620g Communication Protocol CAN/CAN FD Nominal Voltage 48V Nominal Torque 12Nm Nominal Speed 80RPM Nominal Current 3.2A(rms) Torque Constant 4.28Nm/A Pole Pairs 14 Duty Type s2 IP Rating IP40 Cooling Method IC410 Operating Temperature -20℃...
ZBDynamiX ZPA100-20-10-D High-Torque Planetary Joint Actuator | 170 Nm Peak Torque, 10:1 Reduction Ratio，OD 124 mm
ZBDynamiX ZPA100-20-10-D: 170 Nm peak torque, 10:1 reduction ratio, 124mm OD. Features CAN protocol, dual 14-bit encoder, ≤60 dB noise. Ideal for robotic hip and waist joints with high precision (6 arcmin backlash).
ZBDynamiX ZPA100-20-18-D High-Torque Planetary Joint Actuator for Robotics | 300 Nm Peak Torque, 18:1 Ratio，OD 113 mm
ZBDynamiX ZPA100-20-18-D: 300 Nm peak torque, 18:1 reduction ratio, CAN protocol, dual 14-bit encoder. Compact Ø113mm, 1675g weight. Built for robotic joints with high precision (6 arcmin backlash) and durability.
